|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
Primers ensure best adhesion
and are highly recommended for overall exterior Monstaliner™ projects.
On bare metal, fiberglass or questionable OEM painted surfaces we
recommend MAGNAPOXY™ 2 component epoxy primer. Over existing OEM paint
in good condition or previously painted fiberglass, Universal
non-sanding primer is an excellent choice. All surfaces should be
thoroughly DA sanded using 180 - 220 grit paper before applying primers.
Both MAGNAPOXY™ and Universal
Primer can be sprayed or rolled and 1 quart covers approximately 80 to
90 square feet.
* A lacquer
thinner spot test is highly recommended over spray painted
surfaces
before applying either of these primers.
Email questions about this. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
MAGNAPOXY™ 2K
Automotive Epoxy Primer
(Non-Sanding) |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
MAGNAPOXY™ is
a two-component, 3.5 VOC, lead, chromate and isocyanate
free epoxy primer formulated for maximum adhesion and
corrosion resistance to properly prepared metal,
fiberglass and aluminum surfaces. Provides maximum
durability and chip resistance in two coats. Features
fast dry and recoat times and good color holdout
properties. Can be top coated at any time without
concern of lifting. Ideal for truck fleet refinishing,
OEMs, heavy equipment and automotive refinishing where
extended service life is important in harsh and abusive
environments. Fills minor scratches and surface
imperfections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
MAGNAPOXY™ is
compatible with all topcoats and is highly recommended
for use under MONSTALINER™ Bedliner, MAGNACRYL™ Acrylic
Enamel 9000 Series and MAGNATRON™ Acrylic Polyurethane
5000 Series. Not for use in combination with lacquers or
acrylic lacquer base products. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
►
Convenient 1:1 mix ratio
with no induction time
►
Mixed, usable pot life is 24
hours
►
Available in Light Gray in 2 Quart Kits and 2 Gallon Kits
►
Ready-to-spray as supplied
►
Can also be rolled using a low nap phenolic core or foam
roller
►
No sanding required
►
Light Scotch-Brite scuffing required if cured more than 48 hours |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
MAGNET
Universal 1K Non-Sanding Automotive Primer |
|
|
|
|
|
|
|
|
|
|
|
|
MAGNET
UNIVERSAL PRIMER (UP) is an easy-to-use high solids
primer-sealer formulated especially for automotive,
truck, commercial fleet, OEM and industrial finishing
requirements. UP is fast drying and provides good color
holdout and uniformity. It contains less than 3.5
lbs./gal. VOC and exhibits excellent corrosion
resistance without the use of lead or chromates. UP
dries to a smooth surface; no sanding is required.
Sprays extremely well using HVLP guns and since UP
requires no catalyst, hardener or activators, it has an
unlimited pot life. UP can be applied over properly
prepared steel, aluminum or existing OEM finishes.
►
Available in White or Light Gray in Quarts and Gallons
►
Ready-to-spray as supplied
►
Single component offers unlimited pot life
►
Can also be rolled using a low nap phenolic core or foam
roller |
|
|
 |
|
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
Shutz
Undercoating Spray Guns
These guns are
only for spraying bedliner and will not work with
regular paints, primers or Chassis Saver |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WALCOM Shutz Gun
(Italy)
In a world of
low cost China imports, this gun stands above all others
as the finest shutz gun we have ever used. Has a very
nice tip adjustment to provide great variable texture.
Easy to clean and keep around for years. Solidly
constructed from hard ABS plastic with brass and chrome
fittings.
Supplied with
a 1 Quart metal can that screws up under the gun. Siphon
tube requires trimming to just reach bottom of can.
Operates from 20 to 100 PSI |
|
|
|
|
| |
|
 |
 |
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Economy Shutz Gun
Low cost all
aluminum construction.
Supplied with
a 1 Quart metal can that screws up
under the gun. Operates from
20 to 100 PSI |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
 |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
